A dry blend of natural compounds which, when mixed as directed, enables the user to create marine aggregate (e.g. marine snow-like) particles from powdered feed blends of their choosing. This approach permits the incorporation of customized and targeted compounds by the user for the purpose of enhancing immune response, if so desired, or increasing the percentage of color-enhancing compounds within the feed formulation, as examples.  The result is a soft aggregate material, akin to natural marine snow in size and consistency, ravenously consumed by marine fishes, motile invertebrates, and sessile invertebrates equipped to capture relatively large food particles, and which may not benefit from powdered food blends due to inability to adequately capture such fine particles. The soft nature of the food aggregate �particles� is superior to dry pellet and crumbled feeds, as fish are capable of ingesting the aggregate particles immediately without waiting for adequate hydration to occur.  The result is potentially lower feeding requirements and less food lost to filtration and detritus stores.  Aggreg8 also incorporates several natural immunostimulant compounds and feeding stimulants, provided in a specific ratio to encourage robustness and feeding response in marine vertebrates and invertebrates.
Keep container tightly sealed and stored in a dry location below 80�F when not being accessed. Aggreg8 components are hygroscopic and will readily absorb atmospheric moisture if container is left open longer than necessary. If maintained sealed when not in use and kept free of moisture and contaminants, then contents will remain viable for up to 2 years from date of production.
Instructions: Mix with powdered feed at the ratio of 1 g Aggreg8 per 1 g of feed. In a transparent, dry, clean container capable of being closed (for mixing), add the desired mass of powdered feed and an equivalent mass of Aggreg8. Add system water to the mixing container, generally 3 fluid ounces (90 mL) per 1 gram of Aggreg8, cap the vessel securely, and shake well for 5 - 15 seconds to incorporate the dry components, ensuring that no dry components remain visible.  The greater the vigor used when mixing the components, the smaller the aggregate particles will be.  Feed as desired, dispensing into an area of high water flow within the primary display.  If stored at room temperature, then use mixture within 24 hours. Alternately, mix with purified water at the desired ratio and refrigerate solution when not being applied.  Rinse and dry mixing vessel before next use.
Ingredient Statement: Proprietary active components.  This formulation does not incorporate: preservatives; pH-modifying components; food colors; fillers.